VoltAlert ac voltage testers from Fluke are easy to use-just touch the tip to a terminal strip, outlet, or cord. When the tip glows red, you know there's voltage in the line. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits and defective grounds on the factory floor, in the shop, or at home.

• The VoltAlert 1AC is for detecting line voltage from 90V ac to 600V ac.
• Fits in a shirt pocket for convenience.
• All outer surfaces are non-conductive for safety.
• Detects voltage without metallic contact.


• Manufactured, printed and packaged in the US.
• Quickly locates the hot, neutral and ground terminals in any receptacle. (1AC only).
  Mechanical:
• Weight: 40.6 grams with batteries
• Dimensions: 146 mm long x 19 mm, diameter (5.75 inches x 0.75 inch)
• Outer surface: Probe is composed of injection molded, high-impact, non-flammable PVC and ABS
  Standards:
• CAT III-600V>
• ANSI/ISA-S82.01-94>
• IEC 1010-1, 1990>
• IEC 1010-2-031>
  Operating Range: VoltAlert 1AC: 90 volt ac to 600 volt ac
  Operating Temperature: -10°C to 50°C (14°F to 122°F)
  Humidity:
• 0 degrees C to 30 degrees C, 95 percent (32 degrees F to 86 degrees F)
• 30 degrees C to 40 degrees C, 75 percent (86 degrees F to 104 degrees F)
• 40 degrees C tp 50 degrees C, 45% (104 degrees F to 122 degrees F)

NEW MESSAGE

Your Name:   Message: